Filter By:
- Parts & Accessories (71)
- CO2 Inflators (59)
- Floor Pumps (57)
- Frame Pumps (9)
- Mini Pumps (66)
- Shock Pumps (17)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Pumps/Inflation

$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.

$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

$29.95
Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.

$34.95
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

$24.95 - $29.95
Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.

$22.95
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.

$79.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure.
Specs
- PUMP HEAD COMPATIBILITY: Presta / Schrader pumps
- TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves
- GAUGE: Digital, 300 psi / 20.7 bar
- UNIT: psi, bar, kg / cm2
- BATTERY: CR2032 x 1 (included)
- THUMB LOCK: Aluminum
- PRESSURE TUNING: Air release button
- BODY: Aluminum / Engineering grade polymer
- SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7”
- WEIGHT: 102 g / 3.60 oz
Added Features:
- Rotatable head / gauge
- Auto-off function

$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

$74.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails.
- Material: CNC aluminum
- Hydration Capacity: One or two bottles (up to 750cc each)
- Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series
- Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails
- Max Load: 2.5 kg / 5.5 lb
- Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included
- Angle adjustable
- Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9”
- Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)

$59.99
Our workhorse floor pump features a stable and strong steel barrel and base with a composite handle. Presta- and Schrader-compatible, we integrate a sealing lever for simplicity. The robust gauge is positioned at the top of the pump for easy reading of the pressure, whether for road or MTB.
- Steel barrel and base
- Composite handle
- Compatible with road & MTB tires

$76.00
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

$45.95
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.

$24.95
Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation.
- Presta- and Schrader-valve compatible
- Includes mounting hardware to securely attach to water bottle bosses or under bottle cage
- Maximum pressure 90 PSI/6bars
- Approximate weight 4.6oz/130 grams
- 10.5 inches in length (265mm)

$147.95
Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

$19.99 - $24.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged.
- Compact, lightweight design fits in tight spaces
- Press-on for both Presta and Schrader valves
- Compatible with 3/8” threaded cartridges
- Rotate CO2 cartridge to regulate inflation
- Kit includes CNC-machined aluminum inflator head with a green finish for better visibility

$27.99 - $29.99
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges.
- CNC machined aluminum dispenser with brass internals
- CNC control knob twists for easy and controlled inflation
- Twin Slip Chuck head presses on to Presta and Schrader valves
- Neoprene sleeve insulates hand from cold during discharge
- Compatible with threaded CO2 cartridges
- Comes with one 16g cartridge

$25.99
The Genuine Innovations 20-Gram Threaded CO2 Cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread. The 20-gram size will fully inflate those high-volume mountain bike tires (29er, DH, etc.).

$21.99
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology.
- Easy and controllable inflation
- Push-to-inflate technology
- Auto detect head for instant Presta or Schrader valve attachment
- Lightweight, compact design
- Weight: 26 grams
Includes:
(1) HammerHead inflator
(1) threaded 20 gram CO2 cartridge

$17.59
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power!
- Compact and nearly indestructible
- Easy to use and fully controllable
- Patented twist-to-inflate technology
- Press on to both Schrader and Presta valves
- Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges
Product includes:
(1) Microflate Nano inflator head
(1) threaded 20 gram CO2 cartridge

$39.95
Genuine Innovations' Mountain Pipe captures the best of both worlds by combining a CO2 inflator with a manual pump. It fits Presta and Schrader valves and smartly controls the flow of CO2 with Twist-to-Inflate technology. And, you'll never run out of air thanks to the built-in hand pump. The Mountain Pipe also features a hidden container in the handle to store patches and comes with a threaded 16-gram cartridge to get you going.

$15.99
CO2 inflator with 2 cartridge set
Details
- 2 Threaded 16g CO2 cartridge and Klic CO2 head/cartridge adapter (presta only)
- Inflator compatible with threaded 12g, 16g, 20g, and 25g cartridges.
Specs
- Warranty: 5 years
- Weight (Inflator only): 45g

$29.99
Tubeless tire plug kit plus CO2 head.
- Tire plug tool
- Tire plugs
- CO2 head
- Storage case
- Mounting bracket
- 5 year warranty

$36.99
Crank Brothers Klic HP sports a revolutionary design that has a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out.
- High-pressure portable hand pump with hidden magnetic hose
- Premium pump with flexible rubber hose to allow for easy inflation.
- Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle.
- HP (high pressure) version recommended for tires 45c and narrower.
- All Klic pumps come with a bottle cage bracket mount.
- Length 220mm
- Pressure 120psi / 8.3bar
- Weight: 115 grams

$25.99
- For use with Bontrager CO2 cartridges
- Regulator design provides safe, controlled operation
- Reusable cartridge insulator keeps hands protected while inflating
- Compact and lightweight design is easy to store for any ride
- Spring-loaded mechanism regulates airflow for both Presta and Schrader valves

$64.88
A clever, compact mini pump with hidden hose, pressure gauge, and concealed CO2 inflator.
Designed with a chamber for higher-pressure tires, Air Rush Pro Mini Pump is a premium option for quick and easy manual inflation up to 100 psi—or use the included inflator found tucked inside the handle for effortless CO2 inflation.
While not in use, Air Rush Pro stows easily in a jersey pocket or mounts cleanly under a water bottle cage with the included bracket.
Product details
- Two-in-one design combines CO2 inflator and mini pump
- Flexible rubber hose quickly connects to pump body with magnetic attachment
- Hose can be concealed inside pump when not in use
- Pump head securely threads onto Presta and Schrader valves
- Presta-compatible CO2 inflator securely stored in threaded handle
- Folding handle locks into place to add comfort while inflating
- Use included bracket for clean mounting that easily fits under bottle cage

$29.99
Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.

$37.99
Product details
- Intended for low and mid-volume pavement tires
- Inflates tires to 80 psi (5.5bar) with little effort
- Auto-select head locks securely onto Presta or Schrader valves
- Fold-out lever securely locks pump head to valve
- Mounting bracket fits easily under bottle cage
- Easy to read pressure gauge puts information within view

$44.99
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base.
Fresh air for your tires
Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost.
Product details
- Steel construction and replaceable internals provide long-term durability
- Auto-select head instantly fits both Presta and Schrader valves
- Large, stable base minimizes tipping
- Easy-to-read 3-inch base-mounted gauge
- Max pressure 160 psi (11bar)
Page 1 of 10
Next page