Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Surly

$799.00
Midnight Special is a road plus bike designed to provide comfort and speed on those all-day rides that extend well beyond fresh pavement. Midnight Special shines on pot-holed, deteriorating pavement and the occasional long stretch of gravel. Its 650B road plus tires eat up road chatter and absorb all the bumps in the road like the champion it was designed to be. When it comes to road bikes, we just want to toss a few bananas into our pockets and see where the road takes us. We seek out varied surfaces on our rides and frequently go from pavement to gravel to worse pavement. Midnight Special allows us to accomplish all of that quite comfortably. - Higher volume tires allow better fine tuning of tire pressure on varying surfaces and create a wider contact patch for increased traction - Modern road standards like flat-mount disc brakes, 12mm front and rear thru-axles, and a 44mm head tube - Clearance for 650B x 60mm or 700c x 42mm tires without fenders (650B x 50mm or 700c x 38mm with fenders)
$799.00
The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible
$749.00
The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single-track, double-track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hubs and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay-mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).
$749.00
The Grappler is Surly's dedicated drop-bar trail bike. With mountain geo designed around a comfortable, confident drop-bar hand position, it's lively and responsive on single track, double track, and other degraded surfaces. Ready to haul essential gear for all-day dirt rides and quick bikepacking excursions, captured thru-axles front and rear provide ideal stiffness and handling. Built around 27.5" wheels and compatible with internally geared hub and single-speed setups, Surly's tried-and-true Gnot-Boost spacing allows riders to run 142mm or 148mm rear hubs. - 100% Surly Chromoly steel frame and fork, featuring Surly's proprietary 'Natch tubing, double-butted main triangle, 1-1/8" headtube, non-suspension corrected. - Horizontal-slotted dropout, Surly Gnot-Boost spacing. - Seat stay mounted bottle bosses on all sizes except XS, plus three-pack mounts at the top and bottom of the down tube and stealth dropper post routing. - E.D. coated frame for increased life expectancy. - 27.5 x 2.8" tire clearance (with or without fenders).
$710.00
Surly's Ted Trailer is brilliantly engineered to carry almost everything! This seriously stout workhorse is built from chromoly with stainless-steel hardware for excellent durability and it rolls on quality 16-inch wheels and tires. There are even fenders. The trailer sits perfectly level as you ride, so you can haul longer items that extend off the back. You can tote up to 300 pounds of whatever on this bad boy! So go ahead, run all your errands by bike — you'll be smiling when you get back home. Please note that the required Surly hitch for this trailer is sold separately.
$699.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)
$699.00
A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 26 x 2.1" tires with or without fenders
$699.00
A class-leading touring bike, the newly redesigned Disc Trucker provides versatility and dependability on the daily commute or trans-continental excursion. Fork blade three-pack mounts enable you to attach and haul even more stuff, and the frame features a low bottom bracket and long chainstays for comfort and stability while loaded down. With increased stack height and improved standover clearance, plus ample space for larger tires and fenders, it’s designed to go the distance. Introduced in 2012, the Disc Trucker is widely considered one of the best-in-class touring bicycles available today. Truly at home on the road, it features updated geo and modern component compatibility, along with versatile mounting options that make it ideal for daily commutes and months-long disappearing acts alike. Built from Surly’s proprietary, touring-compliant 'Natch tubesets, updates to the Disc Trucker include a shortened seat tube and slightly sloped top tube for better stand-over clearance, plus an increased stack height for a more relaxed riding position. Shortened chainstays offer improved stiffness and maneuverability around corners, while 12mm thru-axles provide a stiffer feel and greater stability when fully loaded. To ensure the Disc Trucker continues to exceed expectations in terms of compatibility with modern product standards, its dropouts have been redesigned to accommodate flat-mount disc brakes and captured thru-axles. An updated fork incorporates dynamo routing and three-pack mounts for even more mounting options. Additionally, the 700c platform now offers clearance for 47mm tires for greater flexibility in tire options. - 100% Chromoly steel frame and fork; double-butted main triangle and E.D. coating for increased frame life - Braze-ons for fenders, racks, and almost anything else you might want to stick on your bike, plus spare spoke holders for when the road gets rough - Fork blade three-pack mounts for even more mounting options, plus routing for Dynamo hubs - Redesigned front and rear dropouts to accommodate captured 12mm thru-axles and flat-mount disc brakes - Clearance for 700c x 47 tires with or without fenders
$649.00
We think by now, most of you get what Straggler is. It’s a madly versatile bike that can be used for most types of riding and riding surfaces. Better still is that you now have the option of 650b wheel size. 650b wheels were popular for a long time many years ago on ‘Constructeur’ style bicycles and we all know how real stuff was back in the day…650b wheels strike a nice balance between the benefits of both 26” and 700c sizes. The smaller wheel allows smaller riders to fit well on smaller frames, produces a stronger wheel, makes fitting big-ass tires easier and are more agile than their larger counterparts. Straggler has disc caliper mounts instead of rim brake studs. It’ll accept rotors up to 160mm. The rear dropouts are unique, too. They’re a partially closed horizontal design that accommodates singlespeed or geared drivetrains. They feature stop screws that thread in from the rear to further secure the wheel and to position the rear wheel for optimal shifting, plus a forward-mounted stop screw on the drive side to keep the wheel from slipping forward under the force of your gargantuan legs. The rear dropouts are spaced 135mm instead of 132.5mm like the Cross-Check simply because there are far more options for disc hubs in this spacing. Straggler 650b has braze-ons for fenders, racks and bottle cages. The geometry is slightly different, with angles and tube lengths very close but not identical to the Cross-Check, but like the Cross-Check it’s ready to take you just about anywhere. It’s a day tripper and a weekender. It’s a ‘rough road’ road bike. It’s a cyclocross bike with no pretense about racing. It’s a utilitarian townie. It’s a light-duty touring bike. It’s an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else. We think that’s pretty neat.
$649.00
So what is this Straggler anyway? The easy answer is to say that we added disc brakes to a Cross-Check and this is close to accurate. People have asked us to make a disc version of our highly versatile Cross-Check for a long time now and almost everything about the two are very similar. Straggler is slightly different, though. The most obvious difference of course is that the Straggler has disc caliper mounts instead of rim brake studs. It’ll accept rotors up to 160mm. The rear dropouts are unique, too. They’re a partially closed horizontal design that accommodates singlespeed or geared drivetrains. They feature stop screws that thread in from the rear to further secure the wheel and to position the rear wheel for optimal shifting, plus a forward-mounted stop screw on the drive side to keep the wheel from slipping forward under the force of your gargantuan legs. The rear dropouts are spaced 135mm instead of 132.5mm like the Cross-Check simply because there are far more options for disc hubs in this spacing. Straggler shares all of the Cross-Check’s braze-ons for fenders, racks and bottle cages. The Straggler’s geometry is slightly different, with angles and tube lengths very close but not identical to the Cross-Check, but like the Cross-Check it’s ready to take you just about anywhere. It’s a day tripper and a weekender. It’s a ‘rough road’ road bike. It’s a cyclocross bike with no pretense about racing. It’s a utilitarian townie. It’s a light-duty touring bike. It’s an all-weather commuter. And when you get tired of one set up, you can swap parts around and turn it into something else. We think that’s pretty neat.
$649.00
Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 650B x 41mm tires with fenders!
$649.00
Straggler is a bikepacking-inspired road/gravel bike mostly at home on pavement but ready for trail duty when called. Born on Gravel. Raised on Pavement Straggler is tuned for cross-over exploration on a wide variety of terrain conditions. It's a day-tripper and a weekender. It's a "rough road" road bike, a cyclocross bike with no pretense about racing, a utilitarian townie, a light-duty touring bike and an all-weather commuter. It's a steel gravel bicycle that thrives on the road. Think of it as a "mountain biker's road bike." If you only have room for one bike in your life, Straggler can (and should) be your one and only. Straggler's capabilities go well beyond asphalt. It also lends itself well to light touring setups. We're talking frame bags, seat bags, and "credit card touring" rather than full-blown touring. Straggler also handles our 8- and 24-Pack Racks well, so you have some heavier-duty loading options. - Accommodations for racks and fenders - Forward-exiting horizontal dropouts for singlespeed compatibility and wheelbase adjustability - Clearance for 700c x 41mm tires with fenders!
$599.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance
$599.00
As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly 4130 CroMoly frame, main triangle is double-butted - 1-1/8" threadless CroMoly fork - Rack, fender, and four sets of Three-Pack mounts - Disc Brake-specific - Single-position vertical rear dropout - 27.5 x 2.8” tire clearance
$549.00
Steel Commuter and Gravel Bike Preamble is a hard-boiled steel commuter built for comfort, durability, and buffoonery on pavement and gravel. Nothing More is Needed. Nothing Less Will Do. The challenge was thus: Build a serious steel bike and give it only the attributes that matter most. Make it quick and comfortable on pavement, as well as confident and compliant on degraded surfaces. What the Enginerds put forth is Preamble, a pavement and gravel utility worker that proves you don't need to cut corners or clip coupons to make a more affordable steel bike. You just need to keep shit simple. Preamble can run racks and fenders and carry a couple water bottles. Surly was raised on stealing basic cable, after all. Smooth and efficient on asphalt, Preamble's double-butted main triangle provides a resplendent ride feel and withstands abuse from life's inevitable potholes. Make it your own with flat bars, drop bars, a basket, or bags. On the road to steel euphoria, Preamble is the gateway drug. Let facts be submitted to a candid world: - Offered in flat-bar and drop-bar configurations - Easy T-Shirt sizing to fit nearly every rider (XS, S, M, L, XL) - Sloping top tubes on XS and Small frames for improved standover and comfort - To offer the best rider experience for every frame size, XS and S frames get 650b wheelsets while M–XL get 700c - Custom-cast single-position vertical dropout
$335.00
The Surly Kid Corral is just that: A Corral where you can store your kids when they’re riding on the deck of your Big Easy, Big Dummy, or Big Fat Dummy. Designed to be semi-modular, the corral offers up different configurations to fit your unique human-corralling needs. As your family grows in size or number, you can adjust the Kid Corral to give your tiny humans more or less freedom. The Kid Corral Kit comes equipped with a full safety rail system, two soft Deck Pads, and a Deck Bar comfortable enough for tiny paws. As an added bonus, the Kid Corral system is tested and compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions. - Semi-modular system is designed to easily add or remove sections of the corral rails to fit your passenger safety needs - Kit includes the full safety rail system, two soft Deck Pads, Deck Bar and required mounting hardware - The Kid Corral system is also compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions
$325.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
$325.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
$250.00
You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag
$203.00
Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.
$199.00
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too. Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2". Specifications: - Axle-to-crown: 420mm - Offset: 50mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders) - Weight: 2.75 lb.
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
$175.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
$175.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
$175.00
Surly's Wednesday fork is made of the same 4130 CroMoly steel as its frame counterpart. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It features many accessory barnacles (or braze-ons if you prefer to speak in "official" terms) like barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs - Fits tires up to 5.25" wide - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch - Weight: 1262g
$165.00
Once long ago, wool was the material of choice for cycling clothes and other active clothing. In the 80s, synthetics began to replace wool because they were new and shiny and stretchy and you could sublimate flashy, detailed graphics onto them which was a nifty thing for teams and shops. Even while synthetics enjoyed their era of dude-holding-the-bong popularity, however, wool did not die off. It still offered some really great features, like great moisture control and a resistance to putrescent reek. Our jerseys are an excellent example of wool done well. We've tried hard to produce something we hope will become your favorite piece of cycling clothing. Our long sleeve jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. Like our short sleeve jerseys they feature a full length zipper and a reinforced rear pocket with zippered access on both sides.
$165.00
Our Men’s Long Sleeve Jerseys are made from medium-weight Merino wool. Merino fibers are soft and non-irritating even on sensitive skin. The fabric weight makes them suitable for cool weather to cold weather. They have a high collar to help keep the cold out and the warm in, and feature a long body and long sleeves. The sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride. They feature a full-length zipper and a reinforced rear pocket with zippered access on both sides. - Merino Wool offers great moisture control and a resistance to odors - Medium-weight Merino wool fibers are soft and non-irritating even on sensitive skin - Full front zip for venting and a high collar to keep out the cold - Sleeves have reinforced thumb holes to help make sure they stay all the way down as you ride - Reinforced rear pocket with zippered access on both sides
$160.00
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
$155.00
If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm