Riser

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Lightweight aluminum construction with a versatile riser bar design.

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

- AL6066-T6 tubular alloy construction - 35mm oversized clamp diameter - 800mm width - 7°/8° back sweep (Depending on rise dimension) - 5° upsweep - ISO-Mountain safety certified - 290-335g (Depending on rise dimension)

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

These 42cm alloy riser handlebars are awesome. Designed by Pure Fix Cycles in California. - Perfect for fixies and urban warrior steeds - 16.5" Wide - 2.25" High - These bars have an ISO standard 25.4mm stem clamp diameter and 22.2mm brake clamp diameter

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

Origin-8's Pro Rise All Mountain Handlebar is made from lightweight, durable 6061-T6 butted aluminum. It provides a 40mm rise with a wrist-friendly 5-degree sweep and a 625mm width.

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

Origin-8's Pro Urban Riser Handlebar is a wonderful city companion. It's crafted from lightweight, durable 6061-T6 aluminum and delivers a heads-up 50mm rise that's great for keeping an eye on your surroundings. At a skinny 560mm wide, you'll have no trouble picking your way through town. And, it comes in a variety of colors to make sure your ride is the sharpest on the block.

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°

- AL7050 tubular alloy construction - 31.8mm clamp diameter - 800mm width - 7° back sweep - ISO-Mountain safety certified - 310-350g (Depending on rise dimension)

Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Sturdy steel construction with a versatile riser bar style.

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

- Light enough for XC, but strong enough for Enduro and Trail - Carbon composite construction - Reinforced and textured clamping areas, with markers for accurate shortening - 5/8 degree with +10mm setback