Mountain

Whether it's tearing around a local XCO track or setting your personal best up a local hill, the Twostroke has you covered. A fresh approach to hardtail design, the Twostroke is not only an efficient climber but designed for a controlled ride even on the most technical XC courses. The Fourstroke-inspired design enriches your experience, allowing riders to attack the terrain with full confidence and master every challenge. Technology: - Radical Geometry: A 67° head angle, long front-end and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. - Tuned Compliance Concept (TCC): Take the edge off the roughest roads to push harder and ride further. The ultimate balance between comfort and performance for a ride that is both forgiving and fast. - Internal Cable Routing: Fully guided internal cable routing for easy installation and a clean look. - Integrated Protection: Molded covers on the chainstay, an integrated chain suck plate and helicopter tape on the downtube ensure durability and a sleek design. - Integrated Fork Stopper: Frame protection for increased stiffness in a straight downtube design. - Wide Tire Clearance: Fully compatible with the new generation of wide XC tires. - Dropper Post Ready: A dedicated shim allows the installation of a 27.2 mm dropper post with stealth cable routing.

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY - A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. INTERNAL CABLE ROUTING - Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION - Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. WIDE TIRE CLEARANCE - Fully compatible with the new generation of wide XC tires.

Whether it's tearing around an XCO track or setting your personal best up a local hill, the Twostroke has you covered. RADICAL GEOMETRY A 67° head angle, long front-end, and 75° seat angle to attack steep and loose terrain with the perfect weight distribution. TUNED COMPLIANCE CONCEPT (TCC) Take the edge off the roughest roads to push harder and ride further. The ultimate balance between comfort and performance for a ride that is both forgiving and fast. INTERNAL CABLE ROUTING Fully guided internal cable routing for easy installation and a clean look. INTEGRATED PROTECTION Molded covers on the chainstay, an integrated chain suck plate, and helicopter tape on the downtube ensure durability and a sleek design. INTEGRATED FORK STOPPER Frame protection for increased stiffness in a straight downtube design. WIDE TIRE CLEARANCE Fully compatible with the new generation of wide XC tires. DROPPER POST READY A dedicated shim allows the installation of a 27.2mm dropper post with stealth cable routing.

You don't ride to contest race podiums or chase PRs. The trail is your race course and your performance depends on how stoked you are. We made the Fourstroke LT for riders like you, to let you excel where control and traction matter as much as power and efficiency. RACE APPLICATION DROPPER (RAD) - The first integrated XC dropper post provides a radical competitive edge, delivering the optimum riding position, both uphill and down. ADVANCED PIVOT SYSTEM (APS) - APS dual-link suspension technology allows you to pedal efficiently, brake hard, and charge rough terrain without compromise. BIG WHEEL CONCEPT (BWC) RACE - A revolutionary approach to XC geometry, tailored to a fast and progressive riding style. LIGHTWEIGHT PREMIUM CARBON - The Fourstroke 01 LT features a full-carbon frame with a new, super-light carbon upper link. The premium carbon upper link saves weight and provides a robust connection between the front and rear triangles. INTEGRATED FORK STOPPER - Engineered for optimized cable routing and frame protection, the integrated fork stopper protects the frame from impacts and allows a straight downtube design for improved stiffness and weight. The cable cover allows for a clean cable entry and creates an additional layer of protection. INTEGRATED PROTECTION - Molded plastic covers on the chainstay and lower link ensure durability and a clean finish. 120 MM TRAVEL - Built for even more fun in the downhill, the Fourstroke 01 LT features 120 millimeters of travel.

The SCOTT Contessa Active 60 is a hardtail mountain bike that features a light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Key Features: - Active 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano Tourney, 21 Speed - Tektro Mechanical Disc Brakes - Kenda Booster Tires Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Aspect 970 is a mountain hardtail that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget-conscious mountain biker. Key Features - Aspect 700/900 Alloy Frame - Suntour XCE28 100mm - Shimano Tourney 21 Speed Drivetrain - Tektro Mech. Disc Brakes - Kenda Booster Tires

The SCOTT Contessa Active 50 is a hardtail mountain bike that features a light Alloy Frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Key Features: - Active 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano TX800, 16 Speed - Tektro Hydraulic Disc Brakes - Kenda Booster Tires Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Aspect 970 is a hardtail mountain bike that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. Key Features: - Aspect 700/900 Alloy Frame - Suntour XCE28 100mm Fork - Shimano Tourney 21 Speed - Tektro Mechanical Disc Brakes - Kenda Booster

The SCOTT Contessa Active 40 is a hardtail mountain bike that features a light alloy frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Key Features: - Active 700/900 Alloy Frame - Suntour XCT30-HLO 100mm Fork - Shimano Altus, 18-Speed - Tektro Hydraulic Disc Brakes - Kenda Booster Tires Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Contessa Active 30 is a hardtail mountain bike that features a light alloy frame. The series comes fully equipped with a Suntour fork, perfect for those always on the go. Key Features: - Active 700/900 Alloy Frame - Suntour XCR32/X1-LO-R 100mm Fork - Shimano Alivio, 18-Speed - Shimano Brakes - Kenda Booster Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Aspect 950 is a hardtail mountain bike that is designed to be light, efficient, and reasonably priced. Featuring disc brakes and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. Key Features: - Aspect 700/900 alloy Frame - Suntour XCT30-HLO 100mm Fork - Shimano Altus, 18 Speed - Tektro Hydraulic Disc Brakes - Kenda Booster Tires

What does it mean to be active? That's up to you. The SCOTT Contessa Active 20 is a hardtail mountain bike that features a light alloy frame. The 20 comes fully equipped with a Suntour fork and a Shimano drivetrain. Key Features: - Active 700/900 Alloy Frame - Suntour XCR32/X1-RL-R 100mm travel - Suntour Remote lockout - Shimano Deore, 20 Speed - Shimano Brakes - Kenda Booster Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Aspect 940 is a mountain hardtail that is designed to be light, efficient, and reasonably priced. Featuring a lockout mechanism for the fork, disc brakes, and Syncros components, this is the perfect bike for the novice or budget conscious mountain biker. Key Features - Aspect 700/900 Alloy Frame - Suntour XCR32-LO-R 100mm - Shimano Alivio 18 Speed Drivetrain - Shimano Hydraulic Disc Brakes - Kenda Booster Tires

What does it mean to be active? That's up to you. The SCOTT Contessa Active 10 is a hardtail mountain bike that features a super-light Alloy Frame. The 10 comes fully equipped with a Suntour fork and a Shimano drivetrain. Key Features: - Active 700/900 Alloy Frame - Suntour XCR32-Air-RL-R 100mm Fork - Suntour Remote lockout - Shimano XT/Deore 22 Speed - Shimano Brakes - Kenda Booster Wheel size: Sizes X-Small – Small: 27.5-inch Size Medium: 29-inch

The SCOTT Scale 940 features an ultralight Carbon Frame. RockShox suspension, a SRAM Eagle drivetrain, and Syncros components create a durable and affordable hardtail designed for world-class speed. Key Features: - Scale Carbon HMF Frame - RockShox Judy 100mm Fork - RideLoc 2-Position Remote - SRAM NX-SX Eagle, 12-Speed - Shimano Disc Brakes - Syncros X-25 Rims - Schwalbe Rapid Rob Tires - Syncros Parts

When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 970. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - SRAM NX-SX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts

When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 960. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Judy 130mm Fork - X-Fusion Nude 5, 120mm, TwinLoc - Shimano XT-Deore 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts

When you think of the perfect mountain bike, what comes to mind? For us, it's the all new Spark 950. Why, you ask? Well, beyond the fact that it is fast, lightweight and ultra capable on all sorts of terrain, it's just damned good lookin'. Short-travel trail bike? "Downcountry" rig? Occasional race bike? Whatever, call it what you want to call it. All we know is that this is one hell of a mountain bike. KEY FEATURES - Spark Alloy SL Frame - RockShox Pike Select RL3 130mm Fork - RS Deluxe Select RL3, 120mm, TwinLoc - SRAM GX Eagle 12 Speed - Shimano Disc Brakes - Syncros X-30SE TR Rims - Schwalbe Wicked Will Tires - Syncros Dropper Post and Parts

The Genius is a mountain bike that was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano XT 12-speed drivetrain and Syncros components, the Genius 910 is action ready. Any Trail. Any Time. Key Features: - Genius Carbon HMF-Alloy Frame - FOX 36 Float Performance Elite 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT, 12-Speed - Shimano XT 4-piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Foldable Tires - FOX Dropper Post - Syncros Parts

The Spark RC Team Issue is the perfect blend of top-notch carbon engineering, never-before-seen levels of integration, and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. Key Features: - Spark RC Carbon HMF Frame - FOX 34 SC Float Perf. 120mm Fork - FOX Nude 5 EVOL, 120mm, TwinLoc - SRAM GX Eagle AXS Transmission - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts Technologies: - Evo-Lap technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - Adjustable Head Angle The all-new Spark features an easily adjustable head angle. - Easy Shock Access It is very easy to access the shock on the all-new Spark. - Patented Integrated Suspension System An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever-important one. - Rear Axle Tool Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30, and a 6 Allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. - Single Pivot Suspension Layout A full-suspension bike will never have success without, well, a good suspension design. From the first time we rode the Spark’s single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark’s suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.

KEY FEATURES: - Spark RC Carbon HMX Frame - RockShox SID Select+ RL3 120mm Fork - RS Nude 5 RL3, 120mm, TwinLoc - SRAM X0 Eagle AXS Transmission - SRAM Level Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts The Spark RC World Cup is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross country race bike of all cross country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30 and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.

KEY FEATURES: - Spark RC Carbon HMX Frame - RockShox SID Ult. RD3 120mm Fork - RS Nude 5 RLC3, 120mm, TwinLoc - SRAM XX SL Eagle AXS Transmission - Shimano XTR Disc Brakes - Syncros Silverton 1.0S Wheels - Maxxis Rekon Race Foldable Tires - FOX Dropper Post, Syncros CF Parts The Spark RC World Cup EVO is the perfect blend of top-notch carbon engineering, never before seen levels of integration and just the right amount of secret sauce. We wanted to make this platform faster than ever before both up and down the hill. Increasing travel, perfecting geometry, and applying input from the world's best athletes, we've created the cross-country race bike of all cross-country race bikes. If you think fast is fun, then you're going to love this ride. Please note that bike specifications are subject to change without prior notice TECHNOLOGIES: ADJUSTABLE HEAD ANGLE With the new Spark, you can adjust the head angle by .6 degrees slacker or steeper. This can be done without cutting cables or bleeding brakes. All you must do is disassemble the bar, rotate the headset cups 180 degrees, and reassemble. EVO-LAP TECHNOLOGY With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology, we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we've optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without sacrificing the stiffness, comfort or impact resistance. The entire range benefitted from our Evo-Lap technology. EASY SHOCK ACCESS Accessing the shock via the bottom bracket area is facilitated through a hatch. This makes it easy to adjust rebound, compression, shock pressure, and for installing or replacing the cable for our TwinLoc Suspension System. PATENTED INTEGRATED SUSPENSION SYSTEM An integrated shock platform allows us to refine suspension characteristics without sacrificing weight. Often, when working with bikes at this level, the concept of marginal gains becomes an ever important one. For the optimal performance of a suspension shock, power transfer must be the most direct possible. What we want to avoid are any inefficient directional movements, in other words, lateral movements (sideways to the direction of travel) as the shock goes through its compression. Having an integrated shock allows us to improve this in several ways. Firstly, the frame construction around the shock and with the trunnion mount can be designed to be much more rigid, reducing movement and fostering more efficient power transfer. We can also add much larger bearings to the seat tube pivot, further reinforcing this area and reducing any unnecessary motion. Our integrated Suspension technology also helps us to engineer frames with a lower shock placement which lowers center of gravity. As a result, the bike benefits from better handling, and a more stable, confidence inspiring ride for the end user. While these may seem like minor improvements individually, the sum of their parts results in more efficient shock performance. Additionally, the shock is fully protected from any foreign elements. Rainy race? No problem, your shock will continue to perform at its best regardless. REAR AXLE TOOL Our rear axle tool has been a staple on our bikes for years, it is now better than ever. It features a T25, T30 and a 6 allen key all in one. With these three options, you can adjust all pivot hardware and nearly everything else there is to adjust on the bicycle. SINGLE PIVOT SUSPENSION LAYOUT A full-suspension bike will never have success without, well, good suspension design. From the first time we rode the Spark's single pivot layout we fell in love. Years later, we still believe that for technical cross-country racing and fast, punchy singletrack it is the best approach. The Spark's suspension layout has a very specific and proven kinematic and less unsprung mass. Using a flex pivot in the seat stay is an ideal solution for bikes in this travel range. This allows us to keep a very lightweight system while still ensuring optimal suspension performance.

As a highly versatile touring bike, the Bridge Club hits the sweet spot that separates on- and off-road excursions. The simplistic design makes it fully adept to handle a full rack and pannier setup, frame bags, or any combination of the two. It doesn’t feel sluggish on paved shortcuts, but can also hold its own on dirt detours. If you’re feeling a little zesty on your next road tour, you won’t be ill-prepared for reroutes through the woods. The Bridge Club is designed to handle it all. - 100% Surly Chromoly frame, main triangle is double-butted; 1-1/8" threadless Chromoly fork - Rack, fender, and four sets of three-pack mounts - Disc brake-specific, single-position vertical rear dropout makes it less intimidating than other bikes in the category - Clearance for 700 x 47mm (with or without fenders) or 27.5 x 2.8" tires (27.5 x 2.6" with fenders)

The All-Around Fat Bike Wednesday sits in the middle of our Trail category, but don't let that fool you into thinking that's its only use. With Wednesday, we borrowed elements from some of our Trail and Touring models to create a versatile fat tire trail bike that can truly handle anything you want to attempt. If you do an equal amount of off-road touring as you do hitting trails, Wednesday's ability to play both parts equally will suit you well. Or, if you're looking for a fat bike and don't need the fattest tires on the market, Wednesday's 26 x 4.6" tire clearance is just the ticket. "Any day of the week's a great day to ride a Wednesday." - Modern mountain standards: stealth dropper post routing, 44mm headtube, suspension correction, front and rear thru-axles - Full suite of useful braze-ons: front and rear racks, multiple sets of three-pack mounts, fenders - Full-forward, short chainstay position: 26 x 3.8" tires on 80mm rims; full-rearward, longer chainstay position: 26 x 4.6" tires on an 80mm rim Specs: - Rear Dropout Configuration: Horizontal slotted with optional vertical dumpout - Rear Hub Spacing: 12 x 177mm (Surly axle included); 10 x 170mm with Surly 10/12 Adapter Washers (not included) - Front Hub Spacing: 15 x 150mm (Surly axle included) - Rear Brake: Disc - 51mm I.S. (203mm max rotor) - Front Brake: Disc - 51mm I.S. (203mm max rotor) - Head Tube: Ø44mm - Steerer Tube: Ø28.6mm (1-1/8") - Crown Race: Ø30mm (1-1/8") - Stock Headset Upper (S.H.I.S.): ZS44/28.6 - Stock Headset Lower (S.H.I.S.): EC44/30 - Front Derailleur (Clamp): High direct mount top-pull (Ø34.9mm) - Max Chainring (CL): 1x (Fat bike 170): 34T; 2x (Fat bike 170): 26/38T; 2x (Surly OD): 22/36T - Tire Clearance Frame: 26 x 4.3" (rear axle position); 26 x 3.8" (front axle position); 29 x 3.0" - Tire Clearance Fork: 26 x 5.25"; 29 x 3.0" - Rigid Fork Spec: 468 x 47mm - Max Suspension Fork Length: 511 x 51mm (Fatbike 100mm) - Bottle Mounts Frame: 2 Standard (XS - M); 3 Standard (L - XL) - Bottle Mounts Fork: 2 Three-Pack - Rack Mounts Frame: Yes (upper and lower threaded) - Rack Mounts Fork: Yes (upper, lower, and mid-blade threaded) - Fender Mounts Frame: Yes - Other Features: Internal dropper post routing compatible

Lowside is the bike that gets you across town for a quick rip on singletrack, then over to the bar for a night out. Your BMX Bike All Grown Up Lowside is like the grownup version of the bike you rode when you were a kid and still had hopes and dreams and some semblance of ambition. It's just as happy riding singletrack as it is parked outside your favorite drinking establishment. Lowside is a single speed mountain bike. Singlespeeding has been a part of Surly's DNA since day one when we launched the 1x1 Rat Ride. After a lot of Homie Fall Fests and more feats of strength than we can recall, we decided to discontinue it a couple years back. Lowside picks up right where the 1x1 left off. "Some have dubbed the Lowside the ultimate pub cruiser." - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Spec'd in alternating years with 26 x 3" or 27.5 x 2.8" tires, the Lowside remains capable of running either option

The Ogre can get you to your job during the week, then way out of town on the weekend. It’s not sluggish on pavement or gravel and can also hold its own on singletrack. Ogre brings several sensible features to the 29er platform, including horizontal slotted dropouts with Gnot-Boost spacing, a tweaked non-suspension corrected geometry, and a beefy tire clearance. - 100% Surly Chromoly steel, double-butted main triangle - TIG-welded, Horizontal slotted with derailleur hanger, Gnot-Boost spacing allows the use of 135mm QR hub, 142 x 12mm thru-axle or 148 x 12mm Boost hubs. Features Rohloff torque arm slot and threaded eyelets for fenders, racks and Surly trailer mounts - Full-length Surly Trip Guide housing line guides for derailleurs and brakes; two sets of bottle cage mounts; upper seatstay threaded barrels, mid- and low-blade fully threaded through-blade fork eyelets; threaded holes for racks, fenders and trailer mounting nuts; Rohloff OEM2 axle plate mounting slot - Disc brakes only. Disc mounts are 51mm IS. Note: rear disc brake is limited to 160mm maximum rotor diameter and requires the use of Surly caliper adaptor (included with frames and bikes) - Frame is E.D. coated for increased life expectancy - Tire clearance for 29 x 2.5" or 27.5 x 3"

The Karate Monkey frame features updated, progressive trail geometry, a new tubeset, and Surly’s Gnot-Boost rear dropout system to support multiple drivetrain and wheel size configurations. - 100% Surly 4130 chromoly steel frame and fork; double-butted main triangle and 44mm headtube - Tubeset uses the same trumpet tubes found on Instigator 2.0 frame - Adjustable rear dropouts with 145mm Gnot-Boost spacing works with 142 x 12, 148 x 12mm, and 135mm w/ 10/12 washer - Internal dropper seatpost routing - 30.9mm seat tube ID - Clearance for 29 x 2.55 or 27.5 x 3 tires

The Karate Monkey features updated, progressive trail geometry, our custom trumpet tubeset, and Surly's Gnot-Boost rear dropout system. Available in a variety of colors, with multiple drivetrain and wheel size configurations.

Karate Monkey is a highly versatile trail bike that plays the part of 29er and 27.5+ equally well. Karate Monkey delivers a resilient, lively ride on all sorts of gnarly terrain. Its frame is a highly-versatile canvas for whatever dirty masterpiece your brain cooks up. According to our computing machine (Thor) it can be set up in approximately 487 different configurations. Originally designed as a 29er (and the frame that helped spark the 29" wheel movement), the latest Karate Monkey is designed to perform just as admirably as a 27.5+ rig as well. This allows you to pick your poison — provided your poison is having a really great time while permanently donning a huge grin, of course. - Modern trail standards: dropper post compatibility, 44mm headtube, Gnot-Boost rear spacing, thru-axles, suspension corrected fork - Compatibility with most mountain bike standards makes it the perfect parts bin bike (no rim brakes allowed though) - Clearance for 29" x 2.5" or 27.5" x 3" tires